Bremach Brick
Brake fluid capacity & service interval
Bremach Brick requires 1 liter of brake fluid. Service intervals include 15000 km/500 hours for checks and 60000 km for changes. The data covers 1 configuration.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| Brick 4x4 Euro 3 (2001-2008) |
|
Additional Notes
- The Bremach Brick 4x4 Euro 3 hydraulic brake system holds a capacity of 1 liter, which represents the total fluid volume for the complete brake circuit rather than a partial service top-up figure.
- A check interval of 15,000 km or 500 hours is specified for the 2001-2008 Brick 4x4 Euro 3, reflecting a dual-trigger threshold where whichever limit is reached first would apply — a common approach in vehicles used across both road and stationary operational contexts.
- The change interval is set at 60,000 km, meaning a full brake fluid replacement occurs at a significantly longer interval than the inspection cycle, with four check points falling within each full change period.
- The use condition is listed as "all," indicating the 15,000 km / 500-hour check and 60,000 km change intervals apply regardless of operating conditions, with no differentiation between normal and severe duty cycles for the 2001-2008 Brick 4x4 Euro 3.