Bedford Midi Van
Power steering fluid capacity & service interval
Bedford Midi Van power steering fluid capacity ranges from 0,5 to 1,7 liters. Service intervals include checking at 20000 km or 40000 km/24 months, and changing at 40000 km/24 months. The data covers 10 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| Midi 2.0 (4x2) (1989-1990) |
|
| Midi 2.0 (4x2) (1989-1990) |
|
| Midi 2.0 (4x4) (1989-1990) |
|
| Midi 2.0 (4x4) (1989-1990) |
|
| Midi 2.0 Turbo D (4x2) (1989-1990) |
|
| Midi 2.0 Turbo D (4x2) (1989-1990) |
|
| Midi 2.2 D (4x2) (1989-1990) |
|
| Midi 2.2 D (4x2) (1989-1990) |
|
| Midi 2.2 D (4x4) (1989-1990) |
|
| Midi 2.2 D (4x4) (1989-1990) |
|
Additional Notes
- The Bedford Midi Van carries a power steering fluid capacity of 1.7 liters across all listed configurations, covering the 2.0-liter petrol, 2.0 Turbo D, and 2.2 D engines in both 4x2 and 4x4 drivetrains for 1989-1990.
- The 1.7-liter power steering capacity represents the total system fill volume, which accounts for the reservoir, pump, and hydraulic lines combined rather than a partial top-up quantity.
- Power steering fluid on all configurations carries a check interval of 20,000 km, which is half the frequency of the 40,000 km change interval, reflecting the importance of monitoring fluid condition and level between full drain-and-fill services.
- The power steering fluid change interval is set at 40,000 km or 24 months under normal use conditions, meaning whichever threshold is reached first triggers the service.
- The steering box holds a notably smaller capacity of 0.5 liters across all listed configurations, consistent with a recirculating-ball or worm-and-sector unit that operates as a sealed or semi-sealed assembly separate from the hydraulic power steering circuit.
- Steering box service on all configurations specifies only a check interval at 40,000 km or 24 months, with no separate fluid change interval listed alongside the capacity figure.
- The power steering system and the steering box are treated as two distinct service items across all configurations, each with separate capacity values and independent service schedules.
- No variation in power steering or steering box capacity exists between the 4x2 and 4x4 drivetrain variants, indicating the steering system hardware carries the same fluid volumes regardless of whether front-axle drive is present.
- The 2.0 Turbo D (4x2) shares identical power steering and steering box specifications with the naturally aspirated 2.0 and 2.2 D variants, suggesting the forced-induction diesel application did not require a different steering system configuration for 1989-1990.