Svedala Demag Tracked pavers

Coolant capacity & service interval

Svedala Demag tracked pavers require 20 liters of coolant. Service intervals include checks every 10 hours and changes every 2000 hours or 24 months. The data covers 2 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
  • DF115C, Type 35 (2001- )
  • Combustion engine
  • Use: Normal
  • Capacity 20 liter
  • Check 10 hours
  • Change 2000 hours/ 24 months
  • DF135C, Type 35 (2001- )
  • Combustion engine
  • Use: Normal
  • Capacity 20 liter
  • Check 10 hours
  • Change 2000 hours/ 24 months

Additional Notes

  • The Svedala Demag DF115C (Type 35) and DF135C (Type 35) share an identical coolant capacity of 20 liters for the combustion engine cooling system, indicating a common engine bay architecture between the two paver models.
  • A 20-liter coolant capacity is a moderately large fill volume, consistent with industrial-grade diesel engines used in tracked paving equipment, where sustained high-load operation demands substantial thermal management.
  • The check interval for both the DF115C and DF135C cooling systems is set at every 10 hours of operation, reflecting the frequency typical of daily or near-daily inspection routines on active job sites.
  • The change interval for both models is specified at 2000 hours or 24 months under normal use conditions, whichever comes first, meaning calendar time can trigger a service event even when machine hours remain low.
  • Both models carry a starting year of 2001 for the Type 35 designation, and the coolant specifications apply from that point forward under normal use conditions.