Still Forklift trucks, electric

Coolant capacity & service interval

Still Forklift trucks, electric require Coolant with a capacity of 4,5 liters. Service intervals include checking every 1000 hours or 12 months and changing every 3000 hours or 24 months. The data covers 4 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
  • RX 60-60, 6341
  • Power electronics/hydraulic oil
  • Use: Normal
  • Capacity 4,5 liter
  • Check 1000 hours/ 12 months
  • Change 3000 hours/ 24 months
  • RX 60-70, 6342
  • Power electronics/hydraulic oil
  • Use: Normal
  • Capacity 4,5 liter
  • Check 1000 hours/ 12 months
  • Change 3000 hours/ 24 months
  • RX 60-80 LSP 900, 6344
  • Power electronics/hydraulic oil
  • Use: Normal
  • Capacity 4,5 liter
  • Check 1000 hours/ 12 months
  • Change 3000 hours/ 24 months
  • RX 60-80, 6343
  • Power electronics/hydraulic oil
  • Use: Normal
  • Capacity 4,5 liter
  • Check 1000 hours/ 12 months
  • Change 3000 hours/ 24 months

Additional Notes

  • All four Still electric forklift variants listed here share a uniform coolant capacity of 4.5 liters, which is the service fill volume for the cooling system serving the power electronics and hydraulic oil circuit.
  • The RX 60-60 (6341), RX 60-70 (6342), RX 60-80 (6343), and RX 60-80 LSP 900 (6344) all carry identical check and change intervals, indicating a shared cooling system architecture across the RX 60 series despite differences in load capacity ratings.
  • Under normal use conditions, the coolant check interval is set at 1,000 operating hours or 12 months, whichever comes first. The dual-trigger structure means time elapsed can prompt a check even when hour accumulation is low.
  • The coolant change interval under normal use is 3,000 operating hours or 24 months. At three times the check frequency, the interval structure reflects a maintenance schedule where fluid condition is monitored well before a full replacement is due.
  • The cooling system in these models serves both power electronics and hydraulic oil, meaning the coolant circuit performs a dual thermal management role rather than a single-function one. The 4.5-liter capacity reflects the volume required to service both functions within one integrated loop.
  • The RX 60-80 LSP 900 (6344) shares the same 4.5-liter capacity and service intervals as the standard RX 60-80 (6343), despite the LSP 900 designation indicating a low-speed protection or specialized operational variant.

Other Systems