Still Forklift trucks, electric

Brake fluid capacity & service interval

Still Forklift trucks, electric require 0,2 liter of Brake fluid. Service intervals include checking every 1000 hours or 12 months and changing every 3000 hours or 24 months. The data covers 5 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
RX 50-10, 5061
  • Use: Normal
  • Capacity 0,2 liter
  • Check 1000 hours/ 12 months
  • Change 3000 hours/ 24 months
RX 50-10c, 5060
  • Use: Normal
  • Capacity 0,2 liter
  • Check 1000 hours/ 12 months
  • Change 3000 hours/ 24 months
RX 50-13, 5063
  • Use: Normal
  • Capacity 0,2 liter
  • Check 1000 hours/ 12 months
  • Change 3000 hours/ 24 months
RX 50-15, 5065
  • Use: Normal
  • Capacity 0,2 liter
  • Check 1000 hours/ 12 months
  • Change 3000 hours/ 24 months
RX 50-16, 5066
  • Use: Normal
  • Capacity 0,2 liter
  • Check 1000 hours/ 12 months
  • Change 3000 hours/ 24 months

Additional Notes

  • The Still RX 50 electric forklift series covers five model variants — the RX 50-10 (5061), RX 50-10c (5060), RX 50-13 (5063), RX 50-15 (5065), and RX 50-16 (5066) — all sharing identical brake fluid specifications across the hydraulic brake system.
  • Each variant carries a brake fluid capacity of 0.2 liter, a figure consistent with a compact hydraulic brake circuit rather than a large reservoir, reflecting the contained braking architecture typical of electric counterbalance forklifts in this load class.
  • The 0.2 liter capacity applies uniformly across all five model numbers, indicating no variation in hydraulic brake system volume between the lighter RX 50-10 and the heavier-rated RX 50-16 within this series.
  • All five variants share a check interval of 1,000 operating hours or 12 months, whichever comes first under normal use conditions. The dual-trigger structure means calendar time alone can prompt a service event even in low-utilization applications.
  • The change interval is set at 3,000 operating hours or 24 months under normal use conditions. At 3,000 hours, a fluid change is due regardless of whether the 24-month calendar threshold has been reached, and vice versa.
  • The ratio between the check interval and the change interval is 1:3 on an hours basis and 1:2 on a calendar basis, meaning two or three fluid checks are expected to occur between each full fluid replacement depending on which trigger governs the schedule in practice.
  • All specifications are designated for normal use conditions, a classification that in industrial equipment typically excludes environments involving extreme temperatures, heavy contamination exposure, or unusually high duty cycles, which may carry separate service requirements.

Other Systems