Ausa Multitask

Automatic transmission fluid capacity & service interval

Ausa Multitask requires automatic transmission fluid with a capacity of 2 liters. Service intervals include checks at 40 hours, changes at 50 hours, and changes at 12 months or 1000 hours. The data covers 2 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
  • BD120ML, Perkins ( -2010)
  • Front
  • Use: Normal
  • Capacity 2 liter
  • Check 40 hours
  • Change 12 months/ 1000 hours
  • BD120ML, Perkins ( -2010)
  • Front
  • Use: Initial service
  • Capacity 2 liter
  • Change 50 hours

Additional Notes

  • The Ausa Multitask BD120ML with Perkins engine (up to 2010) carries a front transaxle automatic transmission fluid capacity of 2 liters, which represents a service fill volume for the front transaxle unit.
  • Under normal use conditions, the front transaxle fluid level is checked at every 40-hour interval, reflecting the hour-based service scheduling common in utility and work vehicle applications.
  • The normal-use change interval for the front transaxle fluid is set at 12 months or 1,000 hours, whichever comes first, combining a calendar-based and hour-based threshold within a single service requirement.
  • An initial service change interval of 50 hours applies to the front transaxle, separate from the ongoing normal-use schedule, with the same 2-liter capacity retained for that first fluid change.

Other Systems