Ausa Reach trucks, Taurulift

Differential fluid capacity & service interval

Ausa Reach trucks and Taurulift models utilize differential fluid with a capacity range of 1,6 to 4,5 liters. Service intervals include checks at 200 hours or 1 month, and fluid changes at 50 hours, 750 hours or 12 months, and 1000 hours or 12 months. The data covers 13 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
  • T144H (2010- )
  • Front
  • Use: Normal
  • Capacity 1,6 liter
  • Check 1 months
  • Change 12 months/ 750 hours
  • T276H (2010- )
  • Front
  • Use: Normal
  • Capacity 4,5 liter
  • Check 1 months
  • Change 12 months/ 750 hours
  • T276H (2010- )
  • Rear
  • Use: Normal
  • Capacity 4,5 liter
  • Check 1 months
  • Change 12 months/ 750 hours
  • T306H (2010- )
  • Front
  • Use: Normal
  • Capacity 4,5 liter
  • Check 1 months
  • Change 12 months/ 750 hours
  • T306H (2010- )
  • Rear
  • Use: Normal
  • Capacity 4,5 liter
  • Check 1 months
  • Change 12 months/ 750 hours
  • T133H
  • Front
  • Use: Normal
  • Capacity 1,6 liter
  • Check 200 hours
  • Change 1000 hours/ 12 months
  • T133H
  • Front
  • Use: Initial service
  • Capacity 1,6 liter
  • Change 50 hours
  • T133H (4X4)
  • Front
  • Use: Normal
  • Capacity 1,6 liter
  • Check 200 hours
  • Change 1000 hours/ 12 months
  • T133H (4X4)
  • Front
  • Use: Initial service
  • Capacity 1,6 liter
  • Change 50 hours
  • T204H
  • Front
  • Use: Normal
  • Capacity 4 liter
  • Check 1 months
  • Change 12 months/ 750 hours
  • T204H
  • Front
  • Use: Initial service
  • Capacity 4 liter
  • Change 50 hours
  • T204H
  • Rear
  • Use: Normal
  • Capacity 3,5 liter
  • Check 1 months
  • Change 12 months/ 750 hours
  • T204H
  • Rear
  • Use: Initial service
  • Capacity 3,5 liter
  • Change 50 hours

Additional Notes

  • The Ausa Taurulift T133H carries a front differential fluid capacity of 1.6 liters, a figure shared by both the standard two-wheel-drive variant and the 4X4 configuration, indicating no difference in differential housing size between the two drivetrain layouts.
  • On the T133H and T133H (4X4), an initial service interval of 50 hours applies to the front differential, separate from the normal-use schedule. Early fluid changes at low hours are standard practice for new mechanical assemblies, as metal-to-metal wear during break-in introduces fine particles into the lubricant.
  • Under normal use, the T133H and T133H (4X4) front differential follows a check interval of every 200 hours and a change interval of 1,000 hours or 12 months, whichever comes first. The T144H (from 2010) uses a shorter check interval of one month alongside a change interval of 12 months or 750 hours, reflecting a time-based rather than purely hour-based inspection cadence.
  • The T204H front differential holds 4 liters of fluid, while the rear differential on the same model holds 3.5 liters. The difference in capacity between the two axles on a single machine reflects distinct housing volumes for front and rear differential assemblies.
  • Both the front and rear differentials on the T204H share the same service schedule under normal use, with a monthly check and a change at 12 months or 750 hours. The initial service interval of 50 hours applies to both positions as well.
  • The T276H (from 2010) specifies 4.5 liters for both the front and rear differentials, and both positions share identical normal-use intervals of a monthly check and a change at 12 months or 750 hours. The T306H (from 2010) carries the same 4.5-liter capacity and identical service intervals across both axles.
  • Across the T276H and T306H, no initial service interval is listed for either differential position, in contrast to the T133H and T204H, which carry explicit 50-hour first-change specifications.

Other Systems