Mazda CX-50 (USA / CAN)
Transfer case fluid capacity & service interval
Mazda CX-50 (USA / CAN) uses transfer case fluid with a capacity of 0.4 liter. The data covers 4 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| CX-50 SKYACTIV-G 2.5 AWD (CAN) (2022- ) |
|
| CX-50 SKYACTIV-G 2.5 AWD (USA) (2022- ) |
|
| CX-50 SKYACTIV-G 2.5 T AWD (CAN) (2022- ) |
|
| CX-50 SKYACTIV-G 2.5 T AWD (USA) (2022- ) |
|
Additional Notes
- The Mazda CX-50 (USA / CAN) transfer case fluid capacity is 0.4 liter across all four listed AWD configurations, covering both the naturally aspirated SKYACTIV-G 2.5 and the turbocharged SKYACTIV-G 2.5 T variants in both markets.
- A 0.4 liter capacity is a relatively small fill volume, which is consistent with a compact transfer case unit designed primarily for torque distribution rather than heavy-duty off-road use.
- The capacity figure of 0.4 liter applies under normal use conditions for all four configurations, meaning the value reflects standard operating service rather than a post-overhaul or first-fill scenario.
- The Canadian and American market specifications for the CX-50 transfer case share an identical 0.4 liter capacity on both the SKYACTIV-G 2.5 and SKYACTIV-G 2.5 T engines, indicating no regional variation in the transfer case fluid volume between the two markets.
- The specifications are noted as transferbox entries, which refers to the sealed transfer case assembly that distributes drive torque between the front and rear axles in the AWD drivetrain.
- Both the standard 2.5-liter and the turbocharged 2.5 T configurations share the same 0.4 liter transfer case capacity, suggesting the same transfer case unit is used regardless of engine output level.