Mazda CX-50 (USA / CAN)

Differential fluid capacity & service interval

Mazda CX-50 (USA / CAN) uses differential fluid with a capacity of 0.35 liter. The data covers 4 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
  • CX-50 SKYACTIV-G 2.5 AWD (CAN) (2022- )
  • Rear
  • Use: Normal
  • Capacity 0,35 liter
  • CX-50 SKYACTIV-G 2.5 AWD (USA) (2022- )
  • Rear
  • Use: Normal
  • Capacity 0,35 liter
  • CX-50 SKYACTIV-G 2.5 T AWD (CAN) (2022- )
  • Rear
  • Use: Normal
  • Capacity 0,35 liter
  • CX-50 SKYACTIV-G 2.5 T AWD (USA) (2022- )
  • Rear
  • Use: Normal
  • Capacity 0,35 liter

Additional Notes

  • The Mazda CX-50 (USA / CAN) rear differential fluid capacity is listed at 0.35 liter across all four configurations covered in the specifications.
  • A capacity as small as 0.35 liter is characteristic of a compact rear differential unit, where the fluid volume required to lubricate the internal gears and bearings is considerably lower than in larger truck-based differentials.
  • Both the naturally aspirated SKYACTIV-G 2.5 and the turbocharged SKYACTIV-G 2.5 T variants share the identical 0.35-liter rear differential capacity, indicating no variation between engine configurations in this regard.
  • The Canadian and United States market versions of each engine variant carry the same 0.35-liter rear differential capacity, reflecting no regional difference in the fluid fill specification.
  • All four rows are designated under normal use conditions, meaning the 0.35-liter capacity figure applies to standard operating environments rather than severe-duty cycles.
  • The specifications cover only AWD configurations, as a rear differential is present solely in all-wheel-drive drivetrains where a rear axle requires dedicated lubrication.

Other Systems