Mazda CX-50 (USA / CAN)

Automatic transmission fluid capacity & service interval

Mazda CX-50 (USA / CAN) uses automatic transmission fluid with a capacity range of 7,7 to 8 liters. The data covers 4 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
CX-50 SKYACTIV-G 2.5 AWD (CAN) (2022- )
  • Use: Normal
  • Capacity 7,7 liter
  • Code: 6/1
CX-50 SKYACTIV-G 2.5 AWD (USA) (2022- )
  • Use: Normal
  • Capacity 7,7 liter
  • Code: 6/1
CX-50 SKYACTIV-G 2.5 T AWD (CAN) (2022- )
  • Use: Normal
  • Capacity 8 liter
  • Code: 6/1
CX-50 SKYACTIV-G 2.5 T AWD (USA) (2022- )
  • Use: Normal
  • Capacity 8 liter
  • Code: 6/1

Additional Notes

  • The Mazda CX-50 (USA / CAN) automatic transaxle fluid capacity differs between the two available engine variants, with the naturally aspirated SKYACTIV-G 2.5 AWD holding 7.7 liters and the turbocharged SKYACTIV-G 2.5 T AWD holding 8 liters.
  • A capacity figure for an automatic transaxle typically represents a service fill, meaning the volume of fluid required when draining and refilling through normal service procedures rather than a complete overhaul, which would generally require a higher total volume.
  • The 0.3-liter difference between the SKYACTIV-G 2.5 and the SKYACTIV-G 2.5 T reflects the additional fluid volume associated with the turbocharged variant's transaxle design.
  • All four configurations, spanning both the Canadian and American markets and both engine types, carry a normal use condition designation, meaning the stated capacities apply under standard operating conditions rather than severe-duty cycles.
  • The Canadian and American market versions of each respective engine share identical automatic transaxle fluid capacities, with both SKYACTIV-G 2.5 AWD variants at 7.7 liters and both SKYACTIV-G 2.5 T AWD variants at 8 liters.

Other Systems