JAC S5 / Refine S5 / T6

Automatic transmission fluid capacity & service interval

JAC S5 / Refine S5 / T6 automatic transmission fluid capacity is 6-6.5 liters. Service intervals include checks at 10000 km or 8 months, and changes at 3000 km or 3 months and 30000 km or 24 months. The data covers 2 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
  • S5 / Refine S5 / T6 2.0T, HFC7202E (2013- )
  • DCT
  • Use: Normal
  • Capacity 6-6,5 liter
  • Check 10000 km/ 8 months
  • Change 30000 km/ 24 months
  • Code: 6/1
  • S5 / Refine S5 / T6 2.0T, HFC7202E (2013- )
  • DCT
  • Use: First change only
  • Capacity 6-6,5 liter
  • Change 3000 km/ 3 months
  • Code: 6/1

Additional Notes

  • The JAC S5 / Refine S5 / T6 2.0T paired with the HFC7202E transaxle carries an automatic transmission fluid capacity of 6 to 6.5 liters, a range that reflects the semi-automatic DCT (dual-clutch transmission) design, where fill volume can vary slightly depending on drain completeness and assembly tolerances.
  • Under normal use conditions, the HFC7202E transaxle follows a check interval of every 10,000 km or 8 months, whichever comes first, alongside a full fluid change interval of 30,000 km or 24 months.
  • A first-change-only interval is specified for the HFC7202E transaxle at 3,000 km or 3 months, applying the same 6 to 6.5 liter capacity as the standard service fill. A break-in change at such a short interval is associated with flushing out metal particles and manufacturing residues that accumulate during initial operation of a new transmission.
  • The 2.0T engine designation in the S5 / Refine S5 / T6 lineup starting from 2013 is paired exclusively with the semi-automatic DCT configuration in the listed specifications, with no alternative transmission type recorded for that engine variant.

Other Systems