DS DS 7, J

Coolant capacity & service interval

DS 7, J uses coolant with a capacity range of 6.5 to 10.5 liters. Service intervals occur every 150000 kilometers or 10 years. The data covers 3 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
DS 7 1.5 BlueHDi 130, YHZ (2022- )
  • Use: Normal
  • Between min and max.
DS 7 E-TENSE 4x4 300, 5GB (2022- )
  • Use: Normal
  • Between min and max.
DS 7 E-TENSE 4x4 360, 5GB (2022- )
  • Use: Normal
  • Between min and max.

Additional Notes

  • Across all three 2022 DS 7 J configurations covered — the 1.5 BlueHDi 130 (YHZ), the E-TENSE 4x4 300 (5GB), and the E-TENSE 4x4 360 (5GB) — the coolant fill specification is expressed as a level range rather than a fixed volume, with the target zone defined as between the minimum and maximum marks on the reservoir.
  • A "between min and max" specification means the cooling system is serviced by topping up to a level within a marked range, rather than by adding a precise measured quantity of fluid.
  • The 1.5 BlueHDi 130 carries engine code YHZ, a 1.5-litre four-cylinder turbodiesel, while both E-TENSE 4x4 variants share the 5GB designation, reflecting a plug-in hybrid powertrain architecture distinct from the diesel unit, yet all three share the same style of coolant fill specification.
  • Both E-TENSE 4x4 variants — the 300 and the 360 — share not only the same engine family code but also identical coolant fill guidance, indicating no differentiation in cooling system service procedure between the two power outputs within that hybrid configuration.
  • All three configurations carry a use condition of normal, meaning the coolant level specification applies under standard operating conditions rather than a severe-use or first-change scenario.

Other Systems