DS DS 7 Crossback, J
Manual transmission fluid capacity & service interval
DS 7 Crossback, J manual transmission fluid capacity ranges from 1,7 liters to 2,9 liters. The data covers 2 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| DS 7 Crossback 1.2 PureTech 130, HNS (2018-2022) |
|
| DS 7 Crossback 1.5 BlueHDi 130, YHZ (2017-2022) |
|
Additional Notes
- The DS 7 Crossback 1.2 PureTech 130 (HNS) carries a dry fill capacity of 1.8 liters and a service fill capacity of 1.7 liters in its manual transaxle. The 0.1-liter difference between dry and service fill reflects residual fluid that remains in the unit during a drain, meaning a routine fluid change requires slightly less volume than filling a completely empty assembly.
- The 1.5 BlueHDi 130 (YHZ) manual transaxle introduces a fins variable that significantly affects capacity figures. A dry fill with fins requires 2.2 liters, while a dry fill without fins rises to 2.9 liters, a difference of 0.7 liters between the two configurations.
- On the 1.5 BlueHDi 130 (YHZ), the service fill capacity follows the same fins-dependent split, calling for 1.9 liters with fins and 2.6 liters without fins. The spread between those two service fill values is again 0.7 liters, consistent with the dry fill gap.
- Comparing the two engines on a service fill basis, the 1.5 BlueHDi 130 (YHZ) with fins holds 1.9 liters against the 1.2 PureTech 130 (HNS) at 1.7 liters, while the without-fins variant of the diesel transaxle at 2.6 liters represents a substantially larger sump than the petrol unit.
- Both engine variants share a normal use condition designation for their manual transaxle fluid specifications, with no severe-use interval listed in the available data.
- The 1.2 PureTech 130 (HNS) coverage begins with the 2018 model year, while the 1.5 BlueHDi 130 (YHZ) coverage starts from 2017, placing the diesel variant one year earlier in the DS 7 Crossback lineup.