DS DS 7, J
Brake fluid capacity & service interval
DS 7, J models require brake fluid with a capacity range between min and max. Service intervals for normal use are specified. The data covers 3 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| DS 7 1.5 BlueHDi 130, YHZ (2022- ) |
|
| DS 7 E-TENSE 4x4 300, 5GB (2022- ) |
|
| DS 7 E-TENSE 4x4 360, 5GB (2022- ) |
|
Additional Notes
- The DS 7 J brake fluid specifications cover three configurations from 2022: the 1.5 BlueHDi 130 with engine code YHZ, the E-TENSE 4x4 300 with code 5GB, and the E-TENSE 4x4 360, also carrying the 5GB code.
- Across all three configurations, the fill quantity is expressed as "between min and max" rather than as a fixed volume, meaning the reservoir level is the reference point rather than a measured capacity figure.
- The 1.5 BlueHDi 130 specification notes a hydraulic brake/clutch system, indicating the brake fluid reservoir serves both the braking circuit and the clutch actuation circuit simultaneously.
- The two E-TENSE 4x4 variants reference only a hydraulic brake system, with no mention of a clutch circuit, which is consistent with the dual-motor electric drivetrain architecture used in plug-in hybrid 4x4 configurations of the DS 7 J.
- All three configurations carry a normal use condition against the "between min and max" fill specification, meaning the reservoir level guidance applies under standard operating conditions.