Dodge Viper, ZB (EU)

Manual transmission fluid capacity & service interval

Dodge Viper, ZB (EU) manual transmission fluid capacity ranges from 3,8 to 3,9 liters. The service interval is 34000 km. The data covers 8 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Viper SRT-10, Phase II ZB (2008-2010)
  • Use: Normal
  • Capacity 3,9 liter
  • Code: TR6060 6/1
Viper SRT-10, Phase II ZB (2008-2010)
  • Use: Severe
  • Capacity 3,9 liter
  • Change 34000 km
  • Code: TR6060 6/1
Viper SRT-10, Phase I ZB (2005-2008)
  • Use: Normal
  • Capacity 3,8 liter
  • Code: Tremec T-56 6/1
Viper SRT-10, Phase I ZB (2005-2008)
  • Use: Severe
  • Capacity 3,8 liter
  • Change 34000 km
  • Code: Tremec T-56 6/1
Viper SRT-10, Phase I ZB (2004-2005)
  • Use: Normal
  • Capacity 3,8 liter
  • Code: Tremec T-56 6/1
Viper SRT-10, Phase I ZB (2004-2005)
  • Use: Severe
  • Capacity 3,8 liter
  • Change 34000 km
  • Code: Tremec T-56 6/1
Viper SRT-10, Phase I ZB (2003-2004)
  • Use: Normal
  • Capacity 3,8 liter
  • Code: Tremec T-56 6/1
Viper SRT-10, Phase I ZB (2003-2004)
  • Use: Severe
  • Capacity 3,8 liter
  • Change 34000 km
  • Code: Tremec T-56 6/1

Additional Notes

  • The Dodge Viper ZB (EU) manual transmission fluid capacity holds at 3.8 liters across all Phase I SRT-10 configurations spanning the 2003-2008 period, a figure that reflects a service fill rather than a full overhaul quantity, as service fills account for residual fluid retained within the transmission after draining.
  • Phase II SRT-10 models from 2008-2010 carry a slightly higher manual transmission fluid capacity of 3.9 liters, representing a 0.1-liter increase over the Phase I specification.
  • Under severe use conditions, all ZB configurations from 2003-2010 share an identical fluid change interval of 34,000 km, regardless of whether the vehicle falls under Phase I or Phase II production.
  • The normal use condition rows across all Phase I and Phase II configurations carry no change interval value in the specifications, with only the fluid capacity of 3.8 or 3.9 liters listed depending on the phase.
  • The 34,000 km severe-use interval applies consistently across three distinct Phase I sub-configurations: the 2003-2004, 2004-2005, and 2005-2008 production spans, with no variation in that interval figure between them.
  • The overlap year of 2004 appears in both the 2003-2004 and 2004-2005 Phase I sub-configurations, each carrying the same 3.8-liter capacity and 34,000 km severe-use interval, indicating no fluid specification change at that production boundary.
  • Similarly, 2008 appears as a shared year between the Phase I 2005-2008 and Phase II 2008-2010 configurations, where the capacity steps from 3.8 liters to 3.9 liters, marking 2008 as the point of transition between the two fill specifications.

Other Systems