Dodge Viper, ZB (USA / CAN)

Coolant capacity & service interval

Dodge Viper, ZB (USA / CAN) uses coolant with a capacity of 15,1 liters. Service intervals occur every 102000 miles or 60 months. The data covers 3 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Viper SRT-10 (USA), Phase II ZB (2008-2010)
  • Use: Normal
  • Capacity 15,1 liter
  • Change 102000 miles/ 60 months
Viper SRT-10 (USA), Phase I ZB (2004-2007)
  • Use: Normal
  • Capacity 15,1 liter
  • Change 102000 miles/ 60 months
Viper SRT-10 (USA), Phase I ZB (2003-2004)
  • Use: Normal
  • Capacity 15,1 liter
  • Change 102000 miles/ 60 months

Additional Notes

  • The Dodge Viper ZB cooling system capacity is 15.1 liters across all three configurations spanning the 2003-2010 model years, which reflects a substantial fill volume consistent with the demands of a high-displacement V10 engine.
  • The Phase I ZB Viper SRT-10 (USA) covering 2003-2004 carries a coolant change interval of 102,000 miles or 60 months under normal use conditions.
  • The Phase I ZB Viper SRT-10 (USA) covering 2004-2007 shares the same 102,000-mile and 60-month interval as the earlier 2003-2004 phase, with no deviation in either capacity or service schedule between the two Phase I date ranges.
  • The Phase II ZB Viper SRT-10 (USA) covering 2008-2010 maintains the 15.1-liter capacity and the 102,000-mile or 60-month change interval, indicating no alteration to coolant system specifications between Phase I and Phase II generations.
  • A 60-month interval translates to five years between coolant changes, which is a relatively extended service schedule and is typically associated with long-life coolant formulations such as OAT (Organic Acid Technology) or HOAT blends rather than conventional green coolant.

Other Systems