Dodge Viper, ZB (EU)

Coolant capacity & service interval

Dodge Viper, ZB (EU) models require coolant with a capacity range of 15 to 15,1 liters. Service intervals are 160000 km or 60 months. The data covers 4 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Viper SRT-10, Phase II ZB (2008-2010)
  • Use: Normal
  • Capacity 15 liter
  • Change 160000 km/ 60 months
Viper SRT-10, Phase I ZB (2005-2008)
  • Use: Normal
  • Capacity 15,1 liter
  • Change 160000 km/ 60 months
Viper SRT-10, Phase I ZB (2004-2005)
  • Use: Normal
  • Capacity 15,1 liter
  • Change 160000 km/ 60 months
Viper SRT-10, Phase I ZB (2003-2004)
  • Use: Normal
  • Capacity 15,1 liter
  • Change 160000 km/ 60 months

Additional Notes

  • The Dodge Viper ZB (EU) cooling system capacity across the 2003-2010 model range sits at either 15.1 or 15 liters, which places it firmly in the territory of high-displacement performance engines requiring substantial coolant volumes to manage thermal load.
  • Phase I ZB variants spanning 2003-2008 share a uniform cooling system capacity of 15.1 liters under normal use conditions, indicating a consistent cooling architecture across those three consecutive specification groups.
  • The Phase II ZB covering 2008-2010 carries a marginally reduced capacity of 15 liters, a 0.1-liter difference from the Phase I figure, reflecting a minor revision to the cooling system volume between generations.
  • All four specification rows share an identical service interval of 160,000 km or 60 months under normal use conditions, meaning the interval structure remained unchanged across the entire 2003-2010 ZB range regardless of phase.
  • A 60-month interval tied to 160,000 km means whichever threshold arrives first governs the service point, so calendar time can become the limiting factor for lower-mileage vehicles before the distance figure is reached.
  • The 15.1-liter capacity noted for Phase I applies specifically to the cooling system fill, not a partial top-up, as the specification is labeled under the cooling system note rather than a reservoir-only or overflow context.

Other Systems