BAIC Senova BJ60
Brake fluid capacity & service interval
BAIC Senova BJ60 brake fluid capacity is 1 liter. Service intervals are 400000 km or 24 months. The data covers 2 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| BJ60 (120 kW) (2023- ) |
|
| BJ60 (196 kW) (2023- ) |
|
Additional Notes
- Both the 120 kW and 196 kW variants of the BAIC Senova BJ60 share a brake fluid capacity of 1 liter, which is a typical service fill volume for a hydraulic brake and clutch system rather than a full overhaul quantity.
- The 1-liter capacity figure applies to the hydraulic brake and clutch system as a combined circuit, meaning a single fluid reservoir serves both functions across both engine variants.
- The change interval is stated as 400,000 km or 24 months, whichever comes first, under normal use conditions. The 24-month time limit reflects the hygroscopic nature of brake fluid, which absorbs moisture over time regardless of distance driven.
- The 400,000 km distance threshold in the change interval is an exceptionally high figure by conventional standards, placing the primary practical trigger for fluid replacement on the 24-month calendar interval rather than mileage accumulation for most driving profiles.
- The normal use condition applies to both the 120 kW and 196 kW configurations, meaning the stated interval is not adjusted for severe driving conditions in the available specifications.
- No variation exists between the two engine variants in either capacity or service interval, indicating a uniform brake fluid specification across the 2023 BJ60 powertrain range as listed.