Valtra (Valmet) X series

Coolant capacity & service interval

Valtra (Valmet) X series coolant capacity ranges from 15,5 to 22 liters. Service intervals include checks at 10 hours and changes at 2000 hours. The data covers 6 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
X100 Hitech (2000-2005)
  • Use: Normal
  • Capacity 17 liter
  • Check 10 hours
  • Change 2000 hours
X105 (2000-2005)
  • Use: Normal
  • Capacity 15,5 liter
  • Check 10 hours
  • Change 2000 hours
X110 Hitech (2000-2005)
  • Use: Normal
  • Capacity 22 liter
  • Check 10 hours
  • Change 2000 hours
X115 (2000-2005)
  • Use: Normal
  • Capacity 20,5 liter
  • Check 10 hours
  • Change 2000 hours
X120 Hitech (2000-2005)
  • Use: Normal
  • Capacity 22 liter
  • Check 10 hours
  • Change 2000 hours
X95 (2000-2005)
  • Use: Normal
  • Capacity 15,5-19,5 liter
  • Check 10 hours
  • Change 2000 hours

Additional Notes

  • Across the Valtra (Valmet) X series (2000-2005), cooling system capacities range from 15.5 liters on the lower-powered models up to 22 liters on the larger Hitech variants, reflecting the differing engine sizes and thermal management demands across the lineup.
  • The X100 Hitech carries a 17-liter cooling system capacity, which sits between the smaller non-Hitech models and the larger Hitech variants, indicating a mid-range engine cooling volume for that configuration.
  • The X110 Hitech and X120 Hitech share an identical cooling system capacity of 22 liters, the highest figure across all listed X series configurations for 2000-2005.
  • The X105 and X115 are the non-Hitech counterparts to the X110 and X120 Hitech models respectively, and both carry lower capacities — 15.5 liters and 20.5 liters — compared to their Hitech equivalents at 22 liters each.
  • The X95 (2000-2005) is the only model in the group with a variable cooling system capacity, listed as 15.5 to 19.5 liters, suggesting the total fill volume depends on the specific configuration or optional equipment fitted to that variant.
  • All six models share a uniform check interval of every 10 operating hours, a short cycle consistent with the demanding thermal conditions typical of agricultural tractor use.
  • The coolant change interval is set at 2,000 operating hours across all listed X series models, a figure that reflects extended-life coolant formulations commonly used in heavy-duty machinery of that era.

Other Systems