Valtra (Valmet) X series

Brake fluid capacity & service interval

Valtra (Valmet) X series brake fluid capacity is 0,3 liter. Service intervals include checking every 250 hours and changing every 2000 hours. The data covers 6 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
X100 Hitech (2000-2005)
  • Use: Normal
  • Capacity 0,3 liter
  • Check 250 hours
  • Change 2000 hours
X105 (2000-2005)
  • Use: Normal
  • Capacity 0,3 liter
  • Check 250 hours
  • Change 2000 hours
X110 Hitech (2000-2005)
  • Use: Normal
  • Capacity 0,3 liter
  • Check 250 hours
  • Change 2000 hours
X115 (2000-2005)
  • Use: Normal
  • Capacity 0,3 liter
  • Check 250 hours
  • Change 2000 hours
X120 Hitech (2000-2005)
  • Use: Normal
  • Capacity 0,3 liter
  • Check 250 hours
  • Change 2000 hours
X95 (2000-2005)
  • Use: Normal
  • Capacity 0,3 liter
  • Check 250 hours
  • Change 2000 hours

Additional Notes

  • All six Valtra (Valmet) X series variants covered here share an identical hydraulic brake system fluid capacity of 0.3 liter, a figure consistent with a sealed, compact brake circuit rather than a large integrated hydraulic reservoir.
  • The 0.3 liter capacity applies uniformly across the X95, X105, X115, the X100 Hitech, X110 Hitech, and X120 Hitech, indicating no meaningful difference in brake circuit volume between the standard and Hitech trim levels.
  • A check interval of 250 hours is specified for all six variants under normal use conditions. In agricultural machinery, 250-hour intervals typically align with seasonal or routine service points, allowing fluid level and condition to be monitored before significant degradation occurs.
  • The change interval is set at 2000 hours across all variants under normal use conditions. At typical tractor operating rates, 2000 hours represents several years of field use, reflecting the relatively stable nature of brake fluid in a closed hydraulic system under normal working loads.
  • The ratio between the check interval and the change interval is 1:8, meaning the fluid is inspected eight times before a full replacement is due. This interval structure is common in hydraulic brake systems where contamination or moisture ingress is gradual rather than sudden.
  • All specifications are rated for normal use conditions only. In hydraulic brake systems, normal use generally refers to standard operating loads and temperatures, as opposed to sustained heavy braking or extreme environmental exposure.

Other Systems