Valtra (Valmet) X series
Clutch fluid capacity & service interval
Valtra (Valmet) X series clutch fluid capacity is 0,2 liter. Service intervals include checking every 250 hours and changing every 2000 hours. The data covers 3 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| X105 (2000-2005) |
|
| X115 (2000-2005) |
|
| X95 (2000-2005) |
|
Additional Notes
- The Valtra (Valmet) X series clutch fluid capacity is listed at 0.2 liter across the X95, X105, and X115 variants, which is a small volume consistent with a hydraulic clutch master and slave cylinder circuit rather than a large reservoir system.
- All three variants covered in the 2000-2005 production range share an identical 0.2 liter capacity, indicating no meaningful volumetric difference between the X95, X105, and X115 hydraulic clutch systems.
- The check interval is set at 250 hours under normal use conditions, which in tractor service terms represents a relatively frequent inspection point given the typical annual operating hours of agricultural equipment.
- The fluid change interval is specified at 2000 hours under normal use conditions, placing a full fluid replacement at eight times the frequency of a routine check interval.
- The 250-hour check interval applies specifically to normal use conditions, meaning the inspection schedule is tied to standard operating environments rather than elevated-stress or severe-duty scenarios.
- The hydraulic clutch system designation across all three X series variants confirms the clutch actuation relies on fluid pressure transmission rather than a mechanical cable or linkage arrangement, making fluid condition and level directly relevant to clutch engagement performance.