Valtra (Valmet) T2 Direct

Differential fluid capacity & service interval

Valtra (Valmet) T2 Direct differential fluid capacity ranges from 7,4 to 7,9 liters. Service intervals include a check at 50 hours and a change at 1000 hours or 12 months. The data covers 6 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
  • T132 D (2010-2012)
  • Front
  • Use: Normal
  • Capacity 7,4 liter (Industrial)
  • Capacity 7,9 liter (Agricultural)
  • Check 50 hours
  • Change 1000 hours/ 12 months
  • T152 D (2010-2012)
  • Front
  • Use: Normal
  • Capacity 7,4 liter (Industrial)
  • Capacity 7,9 liter (Agricultural)
  • Check 50 hours
  • Change 1000 hours/ 12 months
  • T162 D (2010-2012)
  • Front
  • Use: Normal
  • Capacity 7,4 liter (Industrial)
  • Capacity 7,9 liter (Agricultural)
  • Check 50 hours
  • Change 1000 hours/ 12 months
  • T172 D (2010-2012)
  • Front
  • Use: Normal
  • Capacity 7,4 liter (Industrial)
  • Capacity 7,9 liter (Agricultural)
  • Check 50 hours
  • Change 1000 hours/ 12 months
  • T182 D (2010-2012)
  • Front
  • Use: Normal
  • Capacity 7,4 liter (Industrial)
  • Capacity 7,9 liter (Agricultural)
  • Check 50 hours
  • Change 1000 hours/ 12 months
  • T202 D (2010-2012)
  • Front
  • Use: Normal
  • Capacity 7,4 liter (Industrial)
  • Capacity 7,9 liter (Agricultural)
  • Check 50 hours
  • Change 1000 hours/ 12 months

Additional Notes

  • The front differential capacity across all Valtra (Valmet) T2 Direct variants from 2010-2012 differs by application type, with Industrial configurations holding 7.4 liters and Agricultural configurations holding 7.9 liters — a 0.5-liter difference that reflects distinct axle housing or sealing arrangements suited to each deployment environment.
  • The 7.9-liter Agricultural capacity figure represents a notably large front differential fill volume, consistent with heavy-duty axle assemblies designed to handle the sustained torque loads and articulation demands of field operations.
  • All six variants — T132 D, T152 D, T162 D, T172 D, T182 D, and T202 D — share identical front differential fluid capacities and service intervals across both Industrial and Agricultural configurations, indicating a common front axle assembly used throughout the T2 Direct range for the 2010-2012 model years.
  • The fluid check interval is set at 50 hours of operation under normal use conditions, a relatively short inspection cycle that reflects the mechanical stress placed on front differential fluid in tractor applications.
  • The change interval of 1,000 hours or 12 months, whichever comes first, applies under normal use conditions for all T2 Direct variants in this range. The dual-trigger structure means calendar time can mandate a fluid change even when the hourly threshold has not been reached, which is relevant for lower-utilization machines.

Other Systems