Valtra (Valmet) T2 Direct

Coolant capacity & service interval

Valtra (Valmet) T2 Direct coolant capacity is 30 liters. Service intervals include checks at 10 hours and changes at 2000 hours or 24 months. The data covers 6 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
T132 D (2010-2012)
  • Use: Normal
  • Capacity 30 liter
  • Check 10 hours
  • Change 2000 hours/ 24 months
T152 D (2010-2012)
  • Use: Normal
  • Capacity 30 liter
  • Check 10 hours
  • Change 2000 hours/ 24 months
T162 D (2010-2012)
  • Use: Normal
  • Capacity 30 liter
  • Check 10 hours
  • Change 2000 hours/ 24 months
T172 D (2010-2012)
  • Use: Normal
  • Capacity 30 liter
  • Check 10 hours
  • Change 2000 hours/ 24 months
T182 D (2010-2012)
  • Use: Normal
  • Capacity 30 liter
  • Check 10 hours
  • Change 2000 hours/ 24 months
T202 D (2010-2012)
  • Use: Normal
  • Capacity 30 liter
  • Check 10 hours
  • Change 2000 hours/ 24 months

Additional Notes

  • All six Valtra (Valmet) T2 Direct variants covered by these specifications — the T132 D, T152 D, T162 D, T172 D, T182 D, and T202 D — share an identical cooling system capacity of 30 liters across the 2010-2012 model years, indicating a common cooling architecture regardless of engine output rating.
  • A 30-liter cooling system capacity is relatively large for agricultural machinery and is consistent with the demands of high-displacement diesel engines used in mid-to-high horsepower tractors, where sustained thermal loads require greater coolant volume to maintain stable operating temperatures.
  • The check interval of every 10 hours is among the most frequent service actions specified for the cooling system, reflecting the importance of early detection of coolant level loss, contamination, or leaks during normal field operation.
  • The change interval is defined by a dual condition of 2000 hours or 24 months, whichever occurs first. The time-based threshold of 24 months accounts for chemical degradation of coolant additives that occurs independently of engine runtime, making calendar time a relevant factor alongside operational hours.
  • The 2000-hour change interval is a standard benchmark in agricultural equipment servicing, typically aligned with the service life of modern extended-life coolant formulations under normal operating conditions.
  • All specifications across the T132 D through T202 D are classified under normal use conditions, meaning the stated 2000-hour and 24-month change intervals apply to standard operating environments without adjustment for extreme heat, dusty conditions, or other factors that would otherwise shorten service intervals.

Other Systems