Valtra (Valmet) 8050 Mega

Coolant capacity & service interval

Valtra (Valmet) 8050 Mega coolant capacity ranges from 34 to 39,5 liters. Service intervals include checks every 10 hours and changes every 2000 hours or 24 months. The data covers 5 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
8050 (1996-2001)
  • Use: Normal
  • Capacity 34 liter
  • Check 10 hours
  • Change 2000 hours/ 24 months
8150 (1996-2001)
  • Use: Normal
  • Capacity 34 liter
  • Check 10 hours
  • Change 2000 hours/ 24 months
8450 (1996-2001)
  • Use: Normal
  • Capacity 35 liter
  • Check 10 hours
  • Change 2000 hours/ 24 months
8550 (1996-2001)
  • Use: Normal
  • Capacity 35 liter
  • Check 10 hours
  • Change 2000 hours/ 24 months
8750 (1996-2001)
  • Use: Normal
  • Capacity 39,5 liter
  • Check 10 hours
  • Change 2000 hours/ 24 months

Additional Notes

  • The Valtra (Valmet) 8050 Mega cooling system holds 34 liters, a capacity shared with the 8150 across the 1996-2001 production span.
  • The 8450 and 8550 each carry a 35-liter cooling system capacity, one liter above the 8050 and 8150 figures for the same model years.
  • The 8750 stands at the highest cooling system capacity among the 1996-2001 range at 39.5 liters, reflecting the larger engine displacement associated with that model designation.
  • A coolant level check interval of 10 hours applies uniformly across all five models under normal use conditions, indicating a very frequent inspection cadence typical of high-load agricultural equipment.
  • The coolant change interval is specified at 2000 hours or 24 months under normal use conditions, meaning whichever threshold is reached first would govern the service event in practice.
  • The dual-trigger change interval of 2000 hours and 24 months means calendar time can become the governing factor for machines with lower annual operating hours, while high-utilization tractors would reach the hour threshold first.
  • The 1-liter difference in cooling system capacity between the 8050/8150 group and the 8450/8550 group, despite sharing the same change interval, suggests a modest but distinct engine cooling volume requirement between those two configuration tiers.

Other Systems