Valtra (Valmet) A series

Brake fluid capacity & service interval

Valtra (Valmet) A series brake fluid capacity is 0,3 liter. Service intervals include checks every 500 hours and changes every 2000 hours or 24 months. The data covers 10 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
A75L (2004-2008)
  • Use: Normal
  • Capacity 0,3 liter
  • Check 500 hours
  • Change 2000 hours/ 24 months
A75n (2004-2008)
  • Use: Normal
  • Capacity 0,3 liter
  • Check 500 hours
  • Change 2000 hours/ 24 months
A85L (2004-2008)
  • Use: Normal
  • Capacity 0,3 liter
  • Check 500 hours
  • Change 2000 hours/ 24 months
A85n (2004-2008)
  • Use: Normal
  • Capacity 0,3 liter
  • Check 500 hours
  • Change 2000 hours/ 24 months
A95L (2004-2008)
  • Use: Normal
  • Capacity 0,3 liter
  • Check 500 hours
  • Change 2000 hours/ 24 months
A95n (2004-2008)
  • Use: Normal
  • Capacity 0,3 liter
  • Check 500 hours
  • Change 2000 hours/ 24 months
A65 (2002-2004)
  • Use: Normal
  • Capacity 0,3 liter
  • Check 500 hours
  • Change 2000 hours/ 24 months
A75 (2002-2004)
  • Use: Normal
  • Capacity 0,3 liter
  • Check 500 hours
  • Change 2000 hours/ 24 months
A85 (2002-2004)
  • Use: Normal
  • Capacity 0,3 liter
  • Check 500 hours
  • Change 2000 hours/ 24 months
A95 (2002-2004)
  • Use: Normal
  • Capacity 0,3 liter
  • Check 500 hours
  • Change 2000 hours/ 24 months

Additional Notes

  • The Valtra (Valmet) A series hydraulic brake system holds a uniform capacity of 0.3 liter across all listed variants, from the A65 through the A95n. A capacity this small is consistent with a dedicated brake fluid reservoir rather than a shared hydraulic circuit, reflecting a self-contained system with a modest fluid volume.
  • The check interval is set at 500 hours across every listed variant. In agricultural equipment, a 500-hour check interval aligns with routine seasonal inspection points, allowing fluid condition and level to be monitored well before the full change interval is reached.
  • The change interval is specified as 2000 hours or 24 months, whichever comes first, and applies uniformly under normal use conditions across all ten variants. The dual-criterion structure accounts for both high-utilization machines that accumulate hours quickly and lower-utilization machines where calendar aging of the fluid becomes the limiting factor.
  • The 2002-2004 generation includes the A65, A75, A85, and A95, all sharing identical brake fluid specifications. The subsequent 2004-2008 generation introduced L and n suffix variants alongside the base models, yet the capacity, check interval, and change interval remained unchanged across the transition.
  • The L and n suffix variants introduced from 2004 onward represent distinct configurations within the A series, yet the hydraulic brake system specifications for capacity, check, and change intervals are identical to those of the earlier base models. No variation in brake fluid service requirements exists between suffix types within the same generation.
  • All specifications are classified under normal use conditions. In the context of agricultural machinery service schedules, normal use typically refers to standard field and transport operation, as opposed to severe-duty classifications that would otherwise shorten service intervals.

Other Systems