Valtra (Valmet) 8050 Mega
Brake fluid capacity & service interval
Valtra (Valmet) 8050 Mega uses brake fluid with a capacity of 0,3 liter. Service intervals include checking every 250 hours and changing every 2000 hours or 24 months. The data covers 5 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| 8050 (1996-2001) |
|
| 8150 (1996-2001) |
|
| 8450 (1996-2001) |
|
| 8550 (1996-2001) |
|
| 8750 (1996-2001) |
|
Additional Notes
- The Valtra (Valmet) 8050 Mega hydraulic brake system holds a capacity of 0.3 liter, a figure consistent with a service fill rather than a full overhaul volume.
- The 8050, 8150, 8450, 8550, and 8750 variants covering 1996-2001 all share an identical brake fluid capacity of 0.3 liter, indicating no variation across the model range for this system.
- Under normal use conditions, a fluid level check is specified at every 250 hours, which represents a relatively frequent inspection interval relative to the change interval.
- The change interval is set at 2000 hours or 24 months under normal use conditions, meaning whichever threshold is reached first would govern when a fluid replacement is due.
- The 24-month calendar limit on the change interval reflects the hygroscopic nature of brake fluid, which absorbs moisture over time regardless of operational hours accumulated.
- The ratio between the check interval of 250 hours and the change interval of 2000 hours means a fluid level inspection is performed approximately eight times before a full fluid change becomes due.