Valtra (Valmet) 8050 Mega

Clutch fluid capacity & service interval

Valtra (Valmet) 8050 Mega clutch fluid capacity is 0,2 liter. Service intervals include checking every 250 hours and changing every 2000 hours or 24 months. The data covers 5 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
8050 (1996-2001)
  • Use: Normal
  • Capacity 0,2 liter
  • Check 250 hours
  • Change 2000 hours/ 24 months
8150 (1996-2001)
  • Use: Normal
  • Capacity 0,2 liter
  • Check 250 hours
  • Change 2000 hours/ 24 months
8450 (1996-2001)
  • Use: Normal
  • Capacity 0,2 liter
  • Check 250 hours
  • Change 2000 hours/ 24 months
8550 (1996-2001)
  • Use: Normal
  • Capacity 0,2 liter
  • Check 250 hours
  • Change 2000 hours/ 24 months
8750 (1996-2001)
  • Use: Normal
  • Capacity 0,2 liter
  • Check 250 hours
  • Change 2000 hours/ 24 months

Additional Notes

  • The Valtra (Valmet) 8050 Mega carries a clutch fluid capacity of 0.2 liter, which is a small reservoir volume consistent with a hydraulic clutch actuation circuit rather than a large wet-clutch bath.
  • A check interval of 250 hours applies to the hydraulic clutch system, meaning the fluid level and condition are inspected well before a full drain-and-fill is due.
  • The change interval is set at 2000 hours or 24 months under normal use conditions, whichever comes first, combining an operational hour threshold with a calendar-based limit.
  • All five variants in the 8050 Mega series — the 8050, 8150, 8450, 8550, and 8750 — share an identical 0.2-liter capacity across the 1996-2001 model years, indicating no variation in reservoir size across the range.
  • The check-to-change ratio of 250 hours versus 2000 hours means the hydraulic clutch system is inspected roughly eight times before a fluid change is performed under normal operating conditions.
  • The 24-month calendar limit on fluid changes means that even low-hour machines reaching the two-year mark are subject to a fluid change regardless of accumulated operating hours.

Other Systems