Valtra (Valmet) 8050 HiTech

Clutch fluid capacity & service interval

Valtra (Valmet) 8050 HiTech clutch fluid capacity is 0,2 liter. Service intervals include checks at 250 hours and changes at 2000 hours or 24 months. The data covers 6 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
8350 HiTech (2000-2002)
  • Use: Normal
  • Capacity 0,2 liter
  • Check 250 hours
  • Change 2000 hours/ 24 months
8050 HiTech (1999-2002)
  • Use: Normal
  • Capacity 0,2 liter
  • Check 250 hours
  • Change 2000 hours/ 24 months
8150 HiTech (1999-2002)
  • Use: Normal
  • Capacity 0,2 liter
  • Check 250 hours
  • Change 2000 hours/ 24 months
8450 HiTech (1999-2002)
  • Use: Normal
  • Capacity 0,2 liter
  • Check 250 hours
  • Change 2000 hours/ 24 months
8550 HiTech (1999-2002)
  • Use: Normal
  • Capacity 0,2 liter
  • Check 250 hours
  • Change 2000 hours/ 24 months
8950 HiTech (1999-2002)
  • Use: Normal
  • Capacity 0,2 liter
  • Check 250 hours
  • Change 2000 hours/ 24 months

Additional Notes

  • The Valtra (Valmet) 8050 HiTech carries a clutch fluid capacity of 0.2 liter, a figure consistent with a hydraulic clutch system reservoir rather than a large transmission or hydraulic circuit fill volume.
  • All six HiTech variants covered by the specifications share an identical 0.2-liter capacity, indicating a uniform hydraulic clutch reservoir design across the range.
  • The check interval is set at 250 hours under normal use conditions. In agricultural machinery, a 250-hour check interval aligns with routine seasonal service points, allowing fluid level and condition to be monitored before significant degradation occurs.
  • The change interval is specified at 2000 hours or 24 months, whichever comes first. The dual-trigger format means calendar time governs fluid replacement even when a machine accumulates hours slowly, since hydraulic fluid degrades through oxidation and moisture absorption over time regardless of use.
  • The 8350 HiTech carries a model year start of 2000, making its introduction one year later than the 8050, 8150, 8450, 8550, and 8950 HiTech variants, all of which share a 1999 start year.
  • All specifications are rated for normal use conditions. In service documentation for agricultural equipment, normal use typically refers to standard field and road operation as opposed to sustained extreme loads, dusty environments, or other conditions that would shorten service intervals.

Other Systems