Valtra (Valmet) 8050 HiTech

Brake fluid capacity & service interval

Valtra (Valmet) 8050 HiTech brake fluid capacity is 0,3 liter. Service intervals include checking every 250 hours and changing every 2000 hours or 24 months. The data covers 6 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
8350 HiTech (2000-2002)
  • Use: Normal
  • Capacity 0,3 liter
  • Check 250 hours
  • Change 2000 hours/ 24 months
8050 HiTech (1999-2002)
  • Use: Normal
  • Capacity 0,3 liter
  • Check 250 hours
  • Change 2000 hours/ 24 months
8150 HiTech (1999-2002)
  • Use: Normal
  • Capacity 0,3 liter
  • Check 250 hours
  • Change 2000 hours/ 24 months
8450 HiTech (1999-2002)
  • Use: Normal
  • Capacity 0,3 liter
  • Check 250 hours
  • Change 2000 hours/ 24 months
8550 HiTech (1999-2002)
  • Use: Normal
  • Capacity 0,3 liter
  • Check 250 hours
  • Change 2000 hours/ 24 months
8950 HiTech (1999-2002)
  • Use: Normal
  • Capacity 0,3 liter
  • Check 250 hours
  • Change 2000 hours/ 24 months

Additional Notes

  • The Valtra (Valmet) 8050 HiTech hydraulic brake system holds 0.3 liter of brake fluid, a small reservoir volume consistent with a dedicated brake circuit rather than a shared hydraulic system.
  • The 0.3 liter capacity figure applies uniformly across the 8050, 8150, 8350, 8450, 8550, and 8950 HiTech models, indicating a common brake system reservoir design across the range.
  • A check interval of every 250 hours is specified for all six models under normal use conditions, reflecting the relatively frequent inspection cadence typical of hydraulic brake systems in agricultural machinery operating in demanding field environments.
  • The change interval is set at 2000 hours or 24 months, whichever comes first, meaning calendar time can trigger a fluid change even before the hour threshold is reached on lower-utilization machines.
  • The dual-trigger change interval of 2000 hours and 24 months accounts for brake fluid degradation through moisture absorption over time, which occurs regardless of operational hours accumulated.
  • The 8350 HiTech carries a starting year of 2000, while the remaining five models in the range share a starting year of 1999, representing the only variation in model year coverage across the group.
  • All six models share identical capacity, check, and change specifications under normal use conditions, suggesting the hydraulic brake system architecture was standardized across the HiTech series during the 1999-2002 period.

Other Systems