Valtra (Valmet) 6050 HiTech
Brake fluid capacity & service interval
Valtra (Valmet) 6050 HiTech brake fluid capacity is 0,3 liter. Service intervals include checking every 250 hours and changing every 2000 hours or 24 months. The data covers 5 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| 6250 HiTech (1999-2008) |
|
| 6350 HiTech (1999-2008) |
|
| 6550 HiTech (1999-2008) |
|
| 6650 HiTech (1999-2008) |
|
| 6850 HiTech (1999-2008) |
|
Additional Notes
- The hydraulic brake system capacity across all five Valtra (Valmet) 6050 HiTech series variants — the 6250, 6350, 6550, 6650, and 6850 HiTech — is uniformly specified at 0.3 liter, a figure consistent with a service fill rather than a full overhaul volume.
- A check interval of every 250 hours applies to the hydraulic brake system across all listed variants under normal use conditions, reflecting a relatively frequent inspection cycle relative to the change interval.
- The brake fluid change interval is specified at 2000 hours or 24 months, whichever comes first, meaning time elapsed can trigger a change even when the hour threshold has not been reached.
- The 2000-hour change interval represents a ratio of 8:1 between the change and check intervals, meaning the hydraulic brake system fluid level is inspected approximately eight times before a full fluid change is due.
- All five variants share identical capacity, check, and change specifications across the full 1999-2008 model year span, indicating no variation in brake fluid service requirements across engine or trim differences within the HiTech series.