Valtra (Valmet) 8000 Mega
Coolant capacity & service interval
Valtra (Valmet) 8000 Mega coolant capacity is 34 liters. Service intervals include checking every 10 hours and changing every 2000 hours or 24 months. The data covers 3 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| 8800 (Mega) (1994-1996) |
|
| 8300, 8300R (Mega) (1990-1993) |
|
| 8600 (Mega) (1990-1993) |
|
Additional Notes
- All three configurations in the Valtra (Valmet) 8000 Mega series share an identical cooling system capacity of 34 liters, indicating a consistent cooling circuit volume across the 8300, 8300R, 8600, and 8800 variants.
- The 34-liter figure represents a service fill capacity, meaning the volume required to refill the cooling system during a standard coolant change rather than a full overhaul or dry-fill scenario.
- A coolant level check interval of 10 hours applies to all three configurations under normal use conditions, reflecting the relatively short inspection cycle typical of heavy agricultural equipment operating in demanding environments.
- The coolant change interval is set at 2000 hours or 24 months under normal use conditions, with whichever threshold is reached first serving as the trigger for a full coolant replacement.
- The 8300 and 8300R (Mega) models from 1990-1993 share the same 34-liter capacity and 2000-hour/24-month change interval as the 8600 (Mega) from the same production years, indicating no capacity differentiation between those two variants despite their different model designations.
- The 8800 (Mega), produced from 1994-1996, carries forward the same 34-liter capacity and identical check and change intervals as the earlier 1990-1993 models, showing continuity in cooling system specifications across the generational shift within the 8000 Mega lineup.