Valtra (Valmet) 6000 Mezzo

Differential fluid capacity & service interval

Valtra (Valmet) 6000 Mezzo differential fluid capacity is 8 liters. Service intervals include checking at 500 hours and changing at 1000 hours or 12 months. The data covers 7 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
  • 6200 DPS (Mezzo) (1999-2000)
  • Front
  • Use: Normal
  • Capacity 8 liter
  • Check 500 hours
  • Change 1000 hours/ 12 months
  • Code: Dana
  • 6800 DPS (Mezzo) (1999-2000)
  • Front
  • Use: Normal
  • Capacity 8 liter
  • Check 500 hours
  • Change 1000 hours/ 12 months
  • Code: Dana
  • 6000 (Mezzo) (1994-2000)
  • Front
  • Use: Normal
  • Capacity 8 liter
  • Check 500 hours
  • Change 1000 hours/ 12 months
  • Code: Dana
  • 6100 (Mezzo) (1991-2000)
  • Front
  • Use: Normal
  • Capacity 8 liter
  • Check 500 hours
  • Change 1000 hours/ 12 months
  • Code: Dana
  • 6300 (Mezzo) (1991-2000)
  • Front
  • Use: Normal
  • Capacity 8 liter
  • Check 500 hours
  • Change 1000 hours/ 12 months
  • Code: Dana
  • 6400 (Mezzo) (1991-2000)
  • Front
  • Use: Normal
  • Capacity 8 liter
  • Check 500 hours
  • Change 1000 hours/ 12 months
  • Code: Dana
  • 6600 (Mezzo) (1991-2000)
  • Front
  • Use: Normal
  • Capacity 8 liter
  • Check 500 hours
  • Change 1000 hours/ 12 months
  • Code: Dana

Additional Notes

  • The front differential fluid capacity across all Valtra (Valmet) 6000 Mezzo variants is 8 liters, a figure consistent with the front axle differential housings found on tractors of this class and era.
  • The 6000, 6100, 6300, 6400, and 6600 Mezzo models share an introduction window spanning 1991-2000, while the 6200 DPS and 6800 DPS variants appear only from 1999-2000, representing a narrower production window within the same series.
  • The DPS designation on the 6200 DPS and 6800 DPS identifies a distinct transmission configuration, yet the front differential fluid capacity and service intervals for both remain identical to the non-DPS models in the lineup.
  • A check interval of 500 hours under normal use conditions means the fluid level and condition are inspected at that point without a full drain and refill, serving as a midpoint verification between full change intervals.
  • The change interval of 1000 hours or 12 months, whichever comes first under normal use conditions, means calendar time can trigger a fluid change even when the hour threshold has not been reached, which is relevant for tractors with lower annual operating hours.
  • The 1000-hour change interval is a relatively long service cycle for a front differential, reflecting the sealed and load-bearing nature of the housing and the expectation of stable fluid condition under normal agricultural operating conditions.
  • All seven models in the 6000 Mezzo range carry identical front differential fluid specifications, indicating a shared front axle assembly across the series regardless of engine output or transmission variant.

Other Systems