Valtra (Valmet) 6000 Mezzo

Coolant capacity & service interval

Valtra (Valmet) 6000 Mezzo uses coolant with a capacity range of 13,5 to 22 liters. Service intervals include checking every 10 hours and changing every 2000 hours or 24 months. The data covers 7 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
6200 DPS (Mezzo) (1999-2000)
  • Use: Normal
  • Capacity 13,5 liter
  • Check 10 hours
  • Change 2000 hours/ 24 months
6800 DPS (Mezzo) (1999-2000)
  • Use: Normal
  • Capacity 22 liter
  • Check 10 hours
  • Change 2000 hours/ 24 months
6000 (Mezzo) (1994-2000)
  • Use: Normal
  • Capacity 15,5-17 liter
  • Check 10 hours
  • Change 2000 hours/ 24 months
6100 (Mezzo) (1991-2000)
  • Use: Normal
  • Capacity 13,5-17,5 liter
  • Check 10 hours
  • Change 2000 hours/ 24 months
6300 (Mezzo) (1991-2000)
  • Use: Normal
  • Capacity 15,5 liter
  • Check 10 hours
  • Change 2000 hours/ 24 months
6400 (Mezzo) (1991-2000)
  • Use: Normal
  • Capacity 15,5 liter
  • Check 10 hours
  • Change 2000 hours/ 24 months
6600 (Mezzo) (1991-2000)
  • Use: Normal
  • Capacity 15,5 liter
  • Check 10 hours
  • Change 2000 hours/ 24 months

Additional Notes

  • The Valtra (Valmet) 6800 DPS (Mezzo) carries a cooling system capacity of 22 liters, the largest figure across all listed 6000 Mezzo variants. A higher coolant volume generally reflects a larger engine displacement requiring greater thermal management.
  • The 6100 (Mezzo) has the widest capacity range among all listed variants, spanning 13.5 to 17.5 liters. A range rather than a fixed value typically accounts for differences in optional equipment such as cab heaters or additional coolant circuits that increase total system volume.
  • The 6200 DPS (Mezzo) is specified at a fixed 13.5 liters, the lowest single-point capacity value in the group. A fixed capacity, as opposed to a range, indicates a more uniform system configuration with no listed optional circuits affecting total volume.
  • The 6000 (Mezzo), 6300 (Mezzo), 6400 (Mezzo), and 6600 (Mezzo) all share a fixed capacity of 15.5 liters. Where the 6000 (Mezzo) is listed with a range of 15.5 to 17 liters, the upper bound again reflects the potential addition of supplementary heating or cooling circuits.
  • All seven variants share an identical service interval structure: a coolant level check at every 10 hours of operation and a full coolant change at 2000 hours or 24 months, whichever comes first. The dual threshold of hours and calendar time ensures the coolant is renewed even in low-use applications where engine hours accumulate slowly.
  • The 10-hour check interval is notably short and consistent across all listed models. In agricultural tractor applications, frequent checks at this interval reflect the demanding operating environments where coolant loss through minor leaks or evaporation can go undetected between longer scheduled services.
  • The 2000-hour or 24-month change interval applies under normal use conditions for all listed variants. A time-based limit alongside the hour-based threshold accounts for coolant additive degradation, which occurs through chemical aging regardless of engine operating time.
  • The 6200 DPS (Mezzo) and 6800 DPS (Mezzo) share the DPS designation and both entered the specifications from 1999, a narrower production window compared to the 6100 (Mezzo), 6300 (Mezzo), 6400 (Mezzo), and 6600 (Mezzo), which are listed from 1991. Despite the shared DPS designation, the two models differ substantially in cooling system capacity, with the 6800 DPS at 22 liters versus the 6200 DPS at 13.5 liters.

Other Systems