Valtra (Valmet) 6000 Mezzo

Brake fluid capacity & service interval

Valtra (Valmet) 6000 Mezzo brake fluid capacity is 0,3 liter. Service intervals include checking every 250 hours and changing every 2000 hours or 24 months. The data covers 7 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
6200 DPS (Mezzo) (1999-2000)
  • Use: Normal
  • Capacity 0,3 liter
  • Check 250 hours
  • Change 2000 hours/ 24 months
6800 DPS (Mezzo) (1999-2000)
  • Use: Normal
  • Capacity 0,3 liter
  • Check 250 hours
  • Change 2000 hours/ 24 months
6000 (Mezzo) (1994-2000)
  • Use: Normal
  • Capacity 0,3 liter
  • Check 250 hours
  • Change 2000 hours/ 24 months
6100 (Mezzo) (1991-2000)
  • Use: Normal
  • Capacity 0,3 liter
  • Check 250 hours
  • Change 2000 hours/ 24 months
6300 (Mezzo) (1991-2000)
  • Use: Normal
  • Capacity 0,3 liter
  • Check 250 hours
  • Change 2000 hours/ 24 months
6400 (Mezzo) (1991-2000)
  • Use: Normal
  • Capacity 0,3 liter
  • Check 250 hours
  • Change 2000 hours/ 24 months
6600 (Mezzo) (1991-2000)
  • Use: Normal
  • Capacity 0,3 liter
  • Check 250 hours
  • Change 2000 hours/ 24 months

Additional Notes

  • All seven variants in the Valtra (Valmet) 6000 Mezzo range share an identical hydraulic brake system fluid capacity of 0.3 liter, a figure consistent with a compact reservoir serving a closed hydraulic brake circuit rather than a combined hydraulic system.
  • The 250-hour check interval applies under normal use conditions across the entire range, reflecting a periodic inspection point rather than a fluid replacement event at that interval.
  • Fluid replacement is specified at 2000 hours or 24 months under normal use conditions, whichever comes first. The dual-trigger structure accounts for calendar-based fluid degradation, which can occur independently of operating hours in seasonal or low-use applications.
  • The 6000, 6100, 6300, 6400, and 6600 Mezzo variants share a production window spanning 1991-2000, while the 6200 DPS and 6800 DPS variants entered production in 1999, representing a later introduction within the same model family.
  • The DPS designation on the 6200 DPS and 6800 DPS identifies a distinct transmission variant within the Mezzo range, yet the hydraulic brake system capacity and service intervals for both remain identical to the non-DPS models at 0.3 liter, 250-hour checks, and 2000-hour or 24-month changes.
  • The consistent 0.3-liter capacity across all variants, regardless of model number or transmission type, indicates a standardized brake fluid reservoir design shared across the 6000 Mezzo platform.

Other Systems