New Holland TD5

Brake fluid capacity & service interval

The New Holland TD5 uses brake fluid with a capacity of 0.4 liter. The data covers 10 configurations of this model.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
TD5.105 (2020- )
  • Use: Normal
  • Capacity 0,4 liter
TD5.115 (2020- )
  • Use: Normal
  • Capacity 0,4 liter
TD5.85 (2020- )
  • Use: Normal
  • Capacity 0,4 liter
TD5.95 (2020- )
  • Use: Normal
  • Capacity 0,4 liter
TD5.105 (2012-2015)
  • Use: Normal
  • Capacity 0,4 liter
TD5.115 (2012-2015)
  • Use: Normal
  • Capacity 0,4 liter
TD5.65 (2012-2015)
  • Use: Normal
  • Capacity 0,4 liter
TD5.75 (2012-2015)
  • Use: Normal
  • Capacity 0,4 liter
TD5.85 (2012-2015)
  • Use: Normal
  • Capacity 0,4 liter
TD5.95 (2012-2015)
  • Use: Normal
  • Capacity 0,4 liter

Additional Notes

  • The New Holland TD5 series carries a brake fluid capacity of 0.4 liter across all listed variants, from the TD5.65 through to the TD5.115. A capacity in this range is characteristic of a compact hydraulic brake circuit, as found in agricultural tractors of this class, where the system volume is considerably smaller than in heavy commercial vehicles.
  • The 0.4 liter figure applies specifically to the hydraulic brake system fill, not to a combined hydraulic or transmission circuit. In tractor specifications, brake fluid capacity is often listed separately from the main hydraulic system, and the value here reflects only the dedicated brake circuit reservoir volume.
  • All ten configurations across the TD5 range share an identical 0.4 liter capacity under normal use conditions, spanning variants from the TD5.65 to the TD5.115 in the 2012-2015 production period, as well as the TD5.85, TD5.95, TD5.105, and TD5.115 variants from 2020 onward.
  • The specifications are designated for normal use conditions throughout the entire TD5 lineup. In fluid service contexts, a normal use classification typically reflects standard operating environments without the elevated thermal or contamination stress associated with severe duty cycles, which can accelerate brake fluid degradation through moisture absorption.
  • Brake fluid in hydraulic systems is hygroscopic, meaning water absorption over time lowers the fluid's boiling point. The 0.4 liter system volume across the TD5 range means that even small amounts of moisture ingress represent a proportionally significant change in fluid composition, making the normal use condition designation relevant to how frequently the fluid should be evaluated.
  • The TD5.65 and TD5.75 appear only in the 2012-2015 entries, while the TD5.85, TD5.95, TD5.105, and TD5.115 each have both a 2012-2015 entry and a 2020 onward entry. Despite the difference in production periods, the hydraulic brake system capacity of 0.4 liter remains consistent across both generational entries for each of those four variants.

Other Systems