New Holland TD4F
Coolant capacity & service interval
New Holland TD4F coolant capacity is 8 liters. Service intervals include checking every 10 hours and changing every 3600 hours. The data covers 3 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| TD4.70F (2015-2017) |
|
| TD4.80F (2015-2017) |
|
| TD4.90F (2015-2017) |
|
Additional Notes
- The New Holland TD4F cooling system capacity is 8 liters across the TD4.70F, TD4.80F, and TD4.90F variants, indicating a shared cooling circuit design despite the differing engine output ratings within the lineup.
- The 8-liter figure represents the total cooling system fill volume, which typically accounts for the engine block, cylinder head passages, radiator, and connecting hoses rather than a partial service quantity.
- A coolant check interval of 10 hours applies to all three variants under normal use conditions, placing coolant level inspection among the most frequent routine checks in the TD4F service schedule.
- The coolant change interval is set at 3,600 hours for the TD4.70F, TD4.80F, and TD4.90F under normal use conditions, representing a long-life service point that aligns with extended-interval coolant formulations commonly specified for modern agricultural equipment.
- The 3,600-hour change interval is consistent across all three engine variants in the 2015-2017 production range, meaning the cooling system service schedule does not vary by engine displacement or power rating within the TD4F series.
- The gap between the 10-hour check interval and the 3,600-hour change interval reflects a maintenance approach where coolant level and condition are monitored frequently, while full fluid replacement is deferred to a significantly later service milestone.