New Holland TD5000

Coolant capacity & service interval

New Holland TD5000 coolant capacity ranges from 12 to 16 liters. Service intervals consist of checks every 10 hours and changes every 1200 hours or 24 months. The data covers 5 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
TD5010 (2010-2012)
  • Use: Normal
  • Capacity 12 liter
  • Capacity 14 liter (+ cabin)
  • Check 10 hours
  • Change 1200 hours/ 24 months
TD5020 (2010-2012)
  • Use: Normal
  • Capacity 12 liter
  • Capacity 14 liter (+ cabin)
  • Check 10 hours
  • Change 1200 hours/ 24 months
TD5030 (2010-2012)
  • Use: Normal
  • Capacity 12 liter
  • Capacity 14 liter (+ cabin)
  • Check 10 hours
  • Change 1200 hours/ 24 months
TD5040 (2010-2012)
  • Use: Normal
  • Capacity 14 liter
  • Capacity 16 liter (+ cabin)
  • Check 10 hours
  • Change 1200 hours/ 24 months
TD5050 (2010-2012)
  • Use: Normal
  • Capacity 14 liter
  • Capacity 16 liter (+ cabin)
  • Check 10 hours
  • Change 1200 hours/ 24 months

Additional Notes

  • The New Holland TD5000 series cooling system capacities split into two groups across the 2010-2012 model range. The TD5010, TD5020, and TD5030 share a 12-liter base capacity, while the TD5040 and TD5050 require 14 liters without the cabin heater circuit included.
  • When the cabin heater is factored in, the TD5010, TD5020, and TD5030 rise to 14 liters total, reflecting the additional fluid volume held within the heater core and associated plumbing routed to the cab.
  • The TD5040 and TD5050 reach 16 liters when the cabin heater circuit is included, which is 2 liters above the cabin-equipped figure for the three lower variants in the same series.
  • A coolant level check interval of 10 hours applies across all five variants under normal use conditions. An interval this short relative to typical agricultural service schedules reflects the importance of catching early coolant loss before engine temperatures are affected.
  • The coolant change interval is set at 1,200 hours or 24 months, whichever comes first, and applies uniformly across the TD5010 through TD5050 under normal use conditions. The dual-trigger structure means calendar time can mandate a change even when hour accumulation is low.
  • All five variants carry identical check and change intervals despite the capacity difference between the lower and upper models, indicating the service schedule is not adjusted based on system volume within the TD5000 series.

Other Systems