Lindner Unitrac 2
Transfer case fluid capacity & service interval
Lindner Unitrac 2 transfer case fluid capacity is 2 liters. Service intervals include normal use. The data covers 4 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| Unitrac 102 (2007- ) |
|
| Unitrac 102 DPF (2007- ) |
|
| Unitrac 92 (2007- ) |
|
| Unitrac 92 DPF (2007- ) |
|
Additional Notes
- The Lindner Unitrac 2 transfer case fluid specifications cover four configurations: the Unitrac 92, Unitrac 92 DPF, Unitrac 102, and Unitrac 102 DPF, all with a starting year of 2007.
- Each of the four configurations carries a transfer box capacity of 2 liters, which is a service fill figure representing the amount of fluid the transfer case holds during a standard fluid change.
- The 2-liter capacity applies uniformly across both the 92 and 102 variants, meaning the difference in model designation between those two configurations does not correspond to any difference in transfer box fluid volume.
- The DPF-equipped variants, the Unitrac 92 DPF and Unitrac 102 DPF, share the same 2-liter transfer box capacity as their non-DPF counterparts, indicating the addition of a diesel particulate filter system has no bearing on transfer case fluid volume.
- All four configurations list normal as the use condition for the 2-liter transfer box capacity, meaning the specified fill volume is associated with standard operating conditions rather than severe-duty or first-change scenarios.