Lindner Unitrac 2
Coolant capacity & service interval
The Lindner Unitrac 2 uses coolant with a capacity of 21 liters. Four configurations of the model are covered.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| Unitrac 102 (2007- ) |
|
| Unitrac 102 DPF (2007- ) |
|
| Unitrac 92 (2007- ) |
|
| Unitrac 92 DPF (2007- ) |
|
Additional Notes
- The Lindner Unitrac 2 cooling system capacity is listed at 21 liters across all four variants covered in the specifications: the Unitrac 92, Unitrac 92 DPF, Unitrac 102, and Unitrac 102 DPF.
- A 21-liter cooling system capacity is relatively substantial for a utility vehicle, reflecting the thermal management demands of the engines fitted to both the 92 and 102 series.
- All four variants share an identical 21-liter figure, meaning the DPF-equipped models carry the same coolant volume as their non-DPF counterparts despite the addition of diesel particulate filter hardware.
- Each of the four rows is designated for normal use conditions, and the 21-liter capacity value is tied directly to that normal use classification across all listed variants.
- The specifications apply to the cooling system specifically, meaning the 21-liter figure represents the total system fill volume rather than a partial or overflow capacity.
- All four variants share a common starting year of 2007, indicating the 21-liter cooling system capacity has been associated with the Unitrac 2 lineup from at least that point forward.