Lindner Unitrac 2
Power steering fluid capacity & service interval
Lindner Unitrac 2 requires power steering fluid with a capacity of 55 liters. The data covers 4 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
|
|
|
|
|
|
|
|
Additional Notes
- The Lindner Unitrac 2 power steering fluid capacity is shared across all four configurations — the Unitrac 92, Unitrac 92 DPF, Unitrac 102, and Unitrac 102 DPF — each rated at 55 liters.
- A 55-liter capacity reflects a combined hydraulic and power steering system rather than a dedicated standalone power steering reservoir, which is typical in agricultural and utility vehicles where both functions draw from a single shared fluid circuit.
- All four configurations carry a normal use condition designation for the hydraulic and power steering system, meaning the 55-liter capacity figure applies under standard operating conditions.
- The Unitrac 92 and Unitrac 102 variants share identical hydraulic and power steering fluid capacities despite representing different power output tiers, indicating a common system architecture across the lineup starting from 2007.
- The DPF-equipped variants — Unitrac 92 DPF and Unitrac 102 DPF — carry the same 55-liter hydraulic and power steering capacity as their non-DPF counterparts, showing no variation in fluid system sizing between emissions-equipped and standard versions.