Landini Series 7 V-SHIFT
Differential fluid capacity & service interval
Landini Series 7 V-SHIFT differential fluid capacity ranges from 4 to 6 liters. Service intervals include 250 hours and 1000 hours or 12 months. The data covers 23 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Additional Notes
- Across all configurations of the Landini Series 7 V-SHIFT, the front differential capacity is determined by axle type rather than engine output or emissions tier. A rigid front axle holds 6 liters, while a suspended front axle holds 4 liters, a difference of 2 liters that applies consistently across every listed model variant.
- The 6-liter capacity associated with the rigid axle reflects the larger housing volume typical of a solid front axle assembly, which integrates the differential within a fixed, non-articulating structure. The 4-liter figure for the suspended axle corresponds to a more compact differential unit within an independent suspension arrangement.
- Normal-use service intervals across all listed variants are set at 1000 hours or 12 months, whichever comes first. The dual-trigger format means calendar time can prompt a fluid change even when hour accumulation is low, which is relevant for machines used seasonally or intermittently.
- Tier 4f variants of the 7-145, 7-165, and 7-175 (2019-2021) specify the initial service interval as 250 hours, using the label "initial service." T4i/IIIB variants of the 7-175, 7-180, 7-190, and 7-200 apply the same 250-hour interval but label the condition "first change only." Both terms refer to an accelerated first fluid change, a practice intended to remove metallic particles generated during the break-in period of new gear surfaces.
- The Tier 4f variants of the 7-145 and 7-165 (2019-2021) list the rigid axle and suspended axle as separate specification rows, each with its own capacity figure. The T4i/IIIB variants of the 7-175, 7-180, 7-190, and 7-200 present both axle capacities within a single row, indicating the same interval applies regardless of axle type for those configurations.
- Stage V variants of the 7-210, 7-230, and 7-240 (from 2021) carry the same 4-liter and 6-liter capacity split by axle type and the same 1000-hour/12-month normal-use interval as earlier emissions-tier models. No initial service or first-change interval is listed for Stage V variants in these specifications.
- The T4i/IIIB emissions standard applies to the 7-175, 7-180, 7-190, and 7-200 variants, all sharing a model year range of 2016-2021. Within that group, front differential capacities and service intervals are identical across all four power ratings, suggesting a common front axle platform regardless of engine output differences.