Landini Series 7 V-SHIFT

Automatic transmission fluid capacity & service interval

Landini Series 7 V-SHIFT uses automatic transmission fluid with a capacity range of 94 to 106 liters. Service intervals include checks at 10 hours and changes at 500 hours or 1000 hours/12 months. The data covers 8 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
  • 7-175 V-shift, T4i / IIIB (2016-2021)
  • Hydraulic system
  • Use: Normal
  • Capacity 94 liter
  • Capacity 106 liter (+ front hitch)
  • Check 10 hours
  • Change 1000 hours/ 12 months
  • 7-175 V-shift, T4i / IIIB (2016-2021)
  • Hydraulic system
  • Use: Initial service
  • Capacity 94 liter
  • Capacity 106 liter (+ front hitch)
  • Change 500 hours
  • 7-180 V-shift, T4i / IIIB (2016-2021)
  • Hydraulic system
  • Use: Normal
  • Capacity 94 liter
  • Capacity 96 liter (+ front hitch)
  • Check 10 hours
  • Change 1000 hours/ 12 months
  • 7-180 V-shift, T4i / IIIB (2016-2021)
  • Hydraulic system
  • Use: Initial service
  • Capacity 94 liter
  • Capacity 96 liter (+ front hitch)
  • Change 500 hours
  • 7-190 V-shift, T4i / IIIB (2016-2021)
  • Hydraulic system
  • Use: Normal
  • Capacity 94 liter
  • Capacity 106 liter (+ front hitch)
  • Check 10 hours
  • Change 1000 hours/ 12 months
  • 7-190 V-shift, T4i / IIIB (2016-2021)
  • Hydraulic system
  • Use: Initial service
  • Capacity 94 liter
  • Capacity 106 liter (+ front hitch)
  • Change 500 hours
  • 7-200 V-shift, T4i / IIIB (2016-2021)
  • Hydraulic system
  • Use: Normal
  • Capacity 94 liter
  • Capacity 96 liter (+ front hitch)
  • Check 10 hours
  • Change 1000 hours/ 12 months
  • 7-200 V-shift, T4i / IIIB (2016-2021)
  • Hydraulic system
  • Use: Initial service
  • Capacity 94 liter
  • Capacity 96 liter (+ front hitch)
  • Change 500 hours

Additional Notes

  • The Landini Series 7 V-SHIFT transmission/hydraulic system holds a base capacity of 94 liters across all four variants — the 7-175, 7-180, 7-190, and 7-200 — indicating a shared sump design despite differences in engine output ratings.
  • When a front hitch is fitted to the 7-175 or 7-190, total fluid capacity rises to 106 liters, reflecting the additional hydraulic volume required to serve the front linkage circuit.
  • The 7-180 and 7-200 show a smaller front hitch addition, bringing total capacity to 96 liters rather than 106 liters, a 10-liter difference compared to the 7-175 and 7-190 configurations equipped with the same attachment.
  • Under normal use conditions, the standard fluid change interval across all four variants is 1,000 hours or 12 months, whichever comes first, meaning calendar time can trigger a service even when the hour threshold has not been reached.
  • An initial service change interval of 500 hours applies to all four variants, which is half the normal ongoing interval and accounts for the break-in period during which new transmission components shed microscopic wear particles into the fluid.
  • The 10-hour fluid level check interval specified under normal use conditions for all variants reflects the high-volume hydraulic demands typical of continuously variable transmission systems in high-horsepower agricultural tractors, where early detection of fluid loss is critical to system integrity.
  • The initial service rows for all four variants carry only a change interval of 500 hours, with no separate check interval listed, whereas the normal use rows specify both the 10-hour check and the 1,000-hour/12-month change as distinct service actions.

Other Systems