Landini Series 7 SWB
Differential fluid capacity & service interval
Landini Series 7 SWB differential fluid capacity ranges from 4 to 6 liters. Service intervals occur every 1000 hours or 12 months. The data covers 12 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Additional Notes
- Across all Landini Series 7 SWB configurations listed, the front differential fluid change interval is set at 1000 hours or 12 months under normal use conditions, whichever comes first. The dual-trigger format means calendar time alone can prompt a service even when operating hours remain low.
- The front rigid axle differential carries a 6-liter fluid capacity across every listed variant, spanning both Robo-Six and V-SHIFT transmission types from the 7-165 through the 7-185. A 6-liter fill volume is consistent with a larger, undivided axle housing where the differential and final drive share a common fluid reservoir.
- Front differentials equipped with suspension hold 4 liters, which is 2 liters less than the rigid axle equivalent on the same model. Suspended front axles incorporate additional mechanical components that alter housing geometry, reducing the shared fluid volume compared to a rigid axle assembly.
- The 7-175 SWB is the only power rating available in both Robo-Six and V-SHIFT transmission variants within the 2022 specifications. Both transmission types on the 7-175 share identical front differential capacities: 6 liters for the rigid axle and 4 liters for the suspended axle configuration.
- V-SHIFT variants appear at the 7-175 and 7-185 power ratings, while Robo-Six variants cover the 7-165, 7-170, 7-175, and 7-180. Despite the difference in transmission type, the front differential fluid capacities and service intervals are consistent across both transmission families at each axle configuration.
- The 1000-hour service threshold is a standard interval in agricultural tractor maintenance schedules, typically aligning with one to two full working seasons depending on annual usage intensity. Pairing an hour-based threshold with a 12-month calendar limit accounts for tractors that accumulate fewer hours per year but still experience fluid degradation over time.