Landini series 6 V-SHIFT
Differential fluid capacity & service interval
Landini series 6 V-SHIFT uses differential fluid with a capacity range of 4 to 6 liters. Service intervals occur every 1000 hours or 12 months. The data covers 3 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
|
|
|
|
|
|
Additional Notes
- Across all three Landini Series 6 V-Shift variants covered here — the 6-145, 6-160, and 6-175 — the front differential capacity varies depending on axle configuration, with a suspended front axle requiring 4 liters and a rigid axle requiring 6 liters.
- The 50 percent difference in front differential capacity between the two axle types reflects a meaningful structural distinction: a rigid axle is a larger, heavier assembly with greater internal volume, while a suspended front axle incorporates a more compact differential housing.
- All three model variants share identical front differential service intervals under normal use conditions, set at 1,000 hours or 12 months, whichever comes first.
- The dual threshold of 1,000 hours and 12 months means that a machine with low annual operating hours would still reach a service point based on calendar time alone, and vice versa for high-use machines.
- The front differential specifications for the 6-145, 6-160, and 6-175 are uniform across the full 2016-2021 model year span, with no variation in capacity or interval recorded between earlier and later production years within that range.