Landini series 6 V-SHIFT
Automatic transmission fluid capacity & service interval
Landini series 6 V-SHIFT uses automatic transmission fluid with a capacity range of 92 to 104 liters. Service intervals include a check at 10 hours and a change at 1000 hours or 12 months. The data covers 3 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
|
|
|
|
|
|
Additional Notes
- The Landini Series 6 V-SHIFT transmission/hydraulic system carries a base fluid capacity of 92 liters across the 6-145, 6-160, and 6-175 variants for the 2016-2021 model years.
- When a front hitch is installed, the combined transmission/hydraulic system capacity rises to 104 liters, reflecting the additional hydraulic volume required to serve the front hitch circuit.
- The 12-liter difference between the standard and front-hitch configurations applies uniformly across all three power variants in the 6-145, 6-160, and 6-175 lineup.
- A fluid level check interval of 10 hours is specified under normal use conditions, placing the check among the most frequent maintenance tasks in a typical service schedule.
- The fluid change interval is set at 1000 hours or 12 months under normal use conditions, meaning whichever threshold is reached first would govern the service event.
- The identical capacity and interval figures across the 6-145, 6-160, and 6-175 indicate a shared transmission/hydraulic architecture despite the differing power outputs among the three models.
- At 92 liters, the base fill volume is notably large, consistent with a shared transmission and hydraulic reservoir design where a single fluid sump serves both the gearbox and the implement hydraulics simultaneously.