Landini series 6 V-SHIFT

Coolant capacity & service interval

Landini series 6 V-SHIFT uses coolant with a capacity of 27 liters. The service interval is 2000 hours or 24 months. The data covers 3 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
6-145 V-shift (2016-2021)
  • Use: Normal
  • Capacity 27 liter
  • Change 2000 hours/ 24 months
6-160 V-shift (2016-2021)
  • Use: Normal
  • Capacity 27 liter
  • Change 2000 hours/ 24 months
6-175 V-shift (2016-2021)
  • Use: Normal
  • Capacity 27 liter
  • Change 2000 hours/ 24 months

Additional Notes

  • The Landini Series 6 V-Shift cooling system holds 27 liters across the 6-145, 6-160, and 6-175 variants, a capacity consistent with the demands of agricultural tractor engines in this power class.
  • A 27-liter cooling system capacity is notably large compared to passenger vehicle applications, reflecting the extended thermal management requirements of high-torque diesel engines operating under sustained field loads.
  • All three V-Shift variants covered from 2016-2021 share an identical 27-liter coolant capacity, meaning no variation exists between the 6-145, 6-160, and 6-175 in terms of cooling system volume.
  • The coolant change interval for the 6-145, 6-160, and 6-175 is specified at 2000 hours or 24 months under normal use conditions, whichever comes first.
  • A 2000-hour service interval for coolant is relatively extended and is typical of heavy-duty agricultural equipment where long-life coolant formulations are used to maintain corrosion inhibitor effectiveness over prolonged operational periods.
  • The 24-month calendar limit paired with the 2000-hour threshold means that even in lower-utilization scenarios where 2000 hours may not be reached within two years, a coolant change is still due at the two-year mark under normal use conditions.

Other Systems