Landini Large
Brake fluid capacity & service interval
Landini Large uses brake fluid with a capacity of 0,5 liter. Service intervals include checks at 100 hours and changes at 500 hours, 1000 hours, or 12 months. The data covers 4 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| 13000 (1983-1988) |
|
| 10000 (1980-1988) |
|
| 12500 (1978-1983) |
|
| 14500 (1978-1988) |
|
Additional Notes
- The Landini Large hydraulic brake system holds a capacity of 0.5 liter across all four model variants covered in the 1978-1988 period, indicating a relatively compact reservoir volume consistent with tractor brake circuit designs of that era.
- All four variants share a 100-hour check interval for the hydraulic brake system, meaning fluid level inspection is scheduled at the same frequency regardless of model or production year.
- The 10000 (1980-1988) and 12500 (1978-1983) variants carry a change interval of 1000 hours or 12 months under normal use conditions, whichever comes first, combining both an operational hour threshold and a calendar-based limit.
- The 13000 (1983-1988) and 14500 (1978-1988) variants specify a change interval of 500 hours under normal use conditions, which is half the hour-based threshold assigned to the 10000 and 12500 variants.
- The 12500 covers the years 1978-1983, while the 13000 covers 1983-1988, meaning both models were in production during 1983, yet the two carry different change intervals of 1000 hours and 500 hours respectively.
- The 14500 spans the full 1978-1988 range and shares the 500-hour change interval with the 13000, despite the 13000 entering production five years later in 1983.
- The absence of a calendar-based interval alongside the hour-based interval for the 13000 and 14500 contrasts with the dual-condition structure applied to the 10000 and 12500, where both 1000 hours and 12 months serve as change triggers.