Landini Large II
Brake fluid capacity & service interval
The Landini Large II uses brake fluid with a capacity of 0.4 liter. The data covers 4 configurations of this model.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| Large 10000 MK II (1988-1994) |
|
| Large 12500 MK II (1988-1994) |
|
| Large 13000 MK II (1988-1994) |
|
| Large 14500 MK II (1988-1994) |
|
Additional Notes
- All four variants in the Landini Large II lineup covered here share an identical hydraulic brake system capacity of 0.4 liter, meaning no variation exists across the 10000, 12500, 13000, and 14500 MK II configurations for this particular specification.
- A capacity of 0.4 liter is a relatively modest figure, consistent with what is typically seen in a dedicated brake fluid reservoir rather than a combined or integrated hydraulic circuit, pointing to a discrete brake fluid fill point on each of these tractors.
- The 0.4 liter figure applies uniformly across the 1988-1994 model years for all four variants, indicating no mid-production revision to the brake system capacity occurred within that span.
- Each row is designated under normal use conditions, meaning the 0.4 liter capacity specification is tied to standard operating circumstances rather than a severe-duty or first-change scenario.