Landini Landpower II
Coolant capacity & service interval
Landini Landpower II uses coolant with a capacity of 29 liters. Service intervals occur every 2000 hours or 24 months. The data covers 4 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| Landpower II 125, Tier3 (2019- ) |
|
| Landpower II 135, Tier3 (2019- ) |
|
| Landpower II 145, Tier3 (2019- ) |
|
| Landpower II 165, Tier3 (2019- ) |
|
Additional Notes
- The Landini Landpower II cooling system capacity is 29 liters across the 125, 135, 145, and 165 Tier3 variants. A 29-liter figure is consistent with a large agricultural tractor cooling circuit, where the volume accounts for the engine block, radiator, and associated hoses and reservoir.
- The 29-liter capacity applies uniformly to all four power ratings in the Tier3 lineup, indicating a shared cooling system architecture regardless of the output differences between the 125 and 165 horsepower configurations.
- The coolant change interval is set at 2000 hours or 24 months under normal use conditions, whichever comes first. In heavy-duty agricultural equipment, a dual-trigger interval like this accounts for both high-hour seasonal operations and lower-hour machines that still age coolant through oxidation and additive depletion over time.
- The 2000-hour threshold is a relatively extended service interval for coolant, which in practice reflects the use of long-life or extended-drain coolant formulations commonly specified for modern agricultural machinery operating under normal conditions.
- All four Tier3 variants share identical interval specifications of 2000 hours and 24 months, meaning the service schedule does not vary with engine output level within the Landpower II Tier3 range starting from 2019.