Landini Large II
Coolant capacity & service interval
Landini Large II coolant capacity ranges from 22 to 26 liters. Service intervals require a change every 1000 hours. The data covers 4 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| Large 10000 MK II (1988-1994) |
|
| Large 12500 MK II (1988-1994) |
|
| Large 13000 MK II (1988-1994) |
|
| Large 14500 MK II (1988-1994) |
|
Additional Notes
- The Landini Large II cooling system capacities split into two distinct values across the four variants: 22 liters for the Large 10000 MK II and Large 13000 MK II, and 26 liters for the Large 12500 MK II and Large 14500 MK II.
- A 22-liter cooling system capacity, as seen on the Large 10000 MK II and Large 13000 MK II, represents a moderately sized agricultural tractor cooling circuit, consistent with engines in the mid-range power class.
- The 26-liter capacity on the Large 12500 MK II and Large 14500 MK II indicates a larger cooling circuit volume, which is generally associated with higher-displacement engines requiring greater thermal management.
- All four variants share a uniform change interval of 1000 hours under normal use conditions, meaning the coolant replacement schedule does not vary between the 22-liter and 26-liter configurations.
- A 1000-hour service interval for coolant is a common benchmark in agricultural machinery, reflecting the extended operational cycles typical of tractor use rather than the mileage-based intervals found in road vehicles.
- The normal use condition applies to all four variants across the 1988-1994 model years, meaning the 1000-hour interval and the respective capacities are tied specifically to standard operating conditions rather than severe-duty cycles.